TUMBLE DRYER
TD 4113 W
T
D
4
2
1
2
W
Timer
Mains on
Low
emp.
Cotton
Synthetic
T
Cool
IRON DRY
Spun at rpm 800/1000 1200/1400
STORE DRY
STORE DRY
8
0
0
/
1
0
0
0
1
2
0
0
/
1
4
0
0
Spun at rpm
600
kg
kg
6
3
90’-115’ 80’- 100’
45’- 70’ 35’- 55’
1
0
5
’
-
1
3
5
’
9
5
’
-
1
2
0
’
kg 2.5
30'
15'
-
-
40'
25'
6
0
’
-
8
5
’
5
0
’
-
70’
kg
1
E
S
S
E
N
T
I
A
L
AUTOREVERSE
6
kg
GB
INSTRUCTION BOOKLET
125981014
Contents
For the Installer
For the User
Installation Instructions
13
Important Safety Information
Installation
2
2
2
2
●
Technical Specifications
13
14
●
Child Safety
●
Positioning
●
Use
●
Fitting the vent hose
14-15
15
Your New Tumble Dryer
Description of the Appliance
The Control Panel
4
5
6
6
6
6
7
●
Stacking kit (optional accessory)
●
Door reversal
15
●
Electrical connection
16
●
Buttons
●
Mains-on light
●
Time selector dial
Programme Chart
Operating Sequence
Load the laundry
8
8
8
8
8
●
●
Select the option
●
Select the drying time
●
When drying is completed
Hints & Tips on Drying
9
Maintenance and Cleaning
External cleaning
10
10
10
10
●
●
Cleaning the door
●
Cleaning fluff filter
Something Not Working
Service and Spare Parts
Customer Care
11
11
11
12
Guarantee Conditions
Guide to use the Instruction Book
The following symbols will be found in the text to guide you throughout the instructions:
Safety instructions
Hints and tips
Environmental information
3
Your New Tumble Dryer
This tumble dryer will give your wash that soft, relaxed feel whatever
the weather.
Extremely high quality standards both during development and
manufacturing guarantee a long service life for your appliance.
Maximum economy in the operation of your dryer is achieved through
very frugal electricity consumption and short drying times.
Energy saving tips
To save energy we recommend that you follow these
hints:
In the interest
of the environment
●
●
Materials marked with the symbol
recyclable.
are
●
Try to load the maximum capacity of the machine
as small loads are uneconomical.
Check with your local Council or Environmental
Health Office to see if there are facilities in your
area for re-cycling this appliance.
●
Always load well spun laundry. The higher the
spin speed, the lower the electricity consumption
and the shorter the drying times.
●
●
When the appliance is to be scrapped, cut off the
power supply cable and make the door closing
device unusable to prevent young children from
being trapped inside.
●
Do not over-dry laundry, this avoids creasing and
saves energy.
●
Clean the filter regularly to avoid excessive
drying times and high electricity consumption.
Help to keep your country tidy - use authorised
disposal sites for your old appliance.
●
Ventilate the room well. The room temperature
should not exceed +35°C during drying.
How do we help to protect the
environment? We use recycled paper!
•
Old appliance
The symbol
on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to the
applicable collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by in appropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local city office, your household waste disposal
service or the shop where you purchased the product
4
Description of the Appliance
01 Work top
1
34
5
6
02 Programme chart
03 Low Temperature Button
04 Cool Button
T
D
4
2
1
2
W
Timer
Mains on
Low
Temp.
Cool
Cotton
Synthetic
IRON DRY
Spun at rpm 800/1000 1200/1400
STORE DRY
STORE DRY
800/1000 1200/1400
Spun at rpm
600
kg
kg
6
3
90’-115’ 80’- 100’
45’- 70’ 35’- 55’
105’-135’ 95’-120’
kg 2.5
30'
15'
-
-
40'
25'
6
0
’
-
8
5
’
5
0
’
-
70’
kg
1
05 Mains-On Light
06 Drying Time Selector Dial
07 Rating Plate
E
S
S
E
N
T
I
A
L
AUTOREVERSE
6
kg
2
7
08 Fluff filter
09 Door Handle
10 Adjustable feet
9
8
10
11 Side vent outlet
12 Ring nut
13 Rear vent outlet
11
13
12
5
The Control Panel
TD 4113
W
Timer
Mains on
Cotton
Synthetic
Low
Temp.
Cool
IRON DRY
Spun at rpm 800/1000 1200/1400
STORE DRY
STORE DRY
800/1000 1200/1400
105’-135’ 95’-120’
60’- 85’ 50’ - 70’
Spun at rpm
kg 2.5
kg 1
800
kg 6
kg 3
90’-115’ 80’- 100’
45’- 70’ 35’- 55’
30' - 40'
15' - 25'
ESSENTIAL
AUTOREVERSE 6 kg
2 3
4
5
1
1 Programme Chart
This will help you to select the correct time for
drying.
4 Mains-On Light
This lights up when the machine starts operating and
goes out at the end of the programme.
2 Low Temperature Button
5 Drying Time Selector Dial
Press this button to reduce the temperature when
drying particularly delicate cotton or linen items.
In this case you should select a longer drying time.
On the programmes for synthetics the temperature is
automatically reduced.
The selector dial incorporates two drying cycles, one
of up to 120 minutes at a high temperature for cotton
and linen, and one of up to 80 minutes at a low
temperature for synthetic fabrics.
To set the machine to the selected time, turn the dial
clockwise until the time you want coincides exactly
with the pointer.
Therefore it is not necessary to depress this button.
NEVER attempt to turn the dial in an anticlockwise
direction.
3 Cool Button
By depressing this button the heat is cut off. This is
particularly useful to freshen the laundry (e.g. to
remove a persistent odour of moth-balls). Select 20-
30 mins max.
When selecting the drying time, you should
remember that it includes a 8 minute cooling phase
(position
on the dial).
This phase should not be shortened, stopped or
avoided, as this could cause skin burns or damages to
the laundry.
6
Programme Chart
Cotton and linen
Selector dial: up to 120 minutes
Drying time in minutes for
laundry spun at
Amount
of laundry
in kg
Type of laundry:
Degree of drying
800/1000 rpm 1200/1400 rpm
660
3
105-135
60-85
95-120
50-70
Cotton
Towelling
Shirts
Store dry
(wardrobe dry)
Sheets
Hand towels
Tablecloths
Table napkins
6
90-115
45-70
80-100
35-55
Iron dry
(not completely dry;
suitable for ironing)
3
ATTENTION! If you are drying delicate cotton, select the ‘low temperature’ option
Synthetics
Selector dial: up to 80 minutes
Drying time in minutes for laundry
spun at a minimum speed of 800 rpm
Amount of laundry
in kg
Degree of drying
Type of laundry:
2.5
30-40
Synthetics or mixed fabrics
which do not require
ironing.
Store dry
1
15-25
25-35
Synthetics or mixed fabrics
which have to be ironed.
(Please see labels on items)
2.5
Iron dry
1
15-20
ATTENTION! Please follow the instructions on labels when drying mixed fabrics.
Drying times are given as a guide only. Experience will soon enable you to estimate the drying time needed for
your usual laundry loads.
Do not start by selecting a long drying time. It is better to determine the required degree of dryness by gradually
increasing the drying time.
For a mixed load (cotton and synthetics, for example) select the time for the most delicate fibres and increase it
by 10 mins.
7
Operating Sequence
Before using your tumble dryer for the first time, we
recommend you place a few damp cloths inside the
appliance and dry for approximately 20 minutes.
There may be dust inside a brand new tumble dryer.
1. Load the laundry
Open the door by pulling the door handle forwards.
Load the items one at a time, shaking them out
loosely and close the door.
Please check the laundry does not get caught between
the door and filter.
3. Select the drying time
Turn the selector dial clockwise to the desired time
(in the high or low temperature range, according to
the fabrics). The mains-on light illuminates and the
programme starts.
100
120
80
M0046S
P0305
4. When drying is completed
The machine stops automatically and the mains-on
light goes out.
2. Select the required option
Depress Low Temp. or Cool Button depending on the
fabrics you have to dry.
Release button
or
, if depressed.
Open the door and take out the laundry.
Clean the filter after every drying programme.
A clean filter ensures correct functioning of the
appliance.
Low
Temp.
Cool
8
Hints & Tips on Drying
●
Before placing articles of laundry in your tumble
dryer, check the care labels to ensure they are
recommended for tumble drying.
Always load well spun laundry. The higher the
spin speed the lower the electricity consumption
and the shorter the drying time.
●
DO NOT load dripping wet laundry into the
dryer. Roll the article in a towel or spin to remove
excess water.
Care Labels you may find on your laundry
normal drying (high temperature)
delicate drying (low temperature)
do not tumble dry
●
●
Close poppers and zips and fasten any buttons.
Sort the laundry. Separate synthetics from
cotton/linens, and dry separately.
●
●
Remove the laundry immediately after the
programme has finished.
may be tumble dried
Use a fabric conditioning sheet to reduce static.
We recommend the sheet is pinned to an article of
laundry (using a safety pin).
Do not overload the appliance.
Here is a list of the approximate weight of some
common laundry items.
●
●
Mix the load i.e. large and small articles.
When drying large items such as sheets, we
recommend you periodically stop the dryer to
redistribute the load.
Sheet
700 to 1000 g
100 to 200 g
400 to 500 g
50 to 100 g
Pillowcase
Tablecloth
Table Napkin
Kitchen Towel
Linen Hand Towel
Hand Towel
Bath Towel
Bathrobe
DO NOT use the tumble dryer to dry the
following:
70 to 120 g
●
Articles contaminated with inflammable
substances e.g. petrol, cleaning solvents, cooking
oil, fats or hair lacquer.
100 to 150 g
150 to 250 g
700 to 1000 g
1000 to 1500 g
200 to 300 g
150 to 200 g
●
Woollen and synthetic/wool mixtures unless the
item is labelled as suitable for tumble drying.
Shirt
Apron
●
Very delicate articles such as silk.
●
Very large and bulky items such as duvets or
sleeping bags.
9
Maintenance and Cleaning
You must disconnect the appliance from the
electricity supply, before you can carry out any
cleaning or maintenance work.
Cleaning the filter
Your dryer will only function well if the filter is
clean.
The filter collects all the fluff which accumulates
during drying and it must therefore be cleaned at the
end of each programme, before removing the
laundry, with a damp cloth.
External cleaning
Use only soap and water and then dry thoroughly.
From time to time, apply a little wax furniture cream
with a soft cloth.
Important: do not use methylated spirit, diluents or
similar products.
Cleaning the door
Clean periodically the interior part of the door to
remove any fluff.
Accurate cleaning ensures correct drying.
P0767
The filter cannot be removed.
Do not be alarmed by the amount of fluff. It is not
due to excessive wear caused by the dryer. All fabric
looses fluff when drying but it goes un-noticed in the
air. In a tumble dryer it simply collects in the filter.
P0328
10
Something Not Working
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without
calling out an engineer. Before contacting your local Service Centre, please carry out the checks listed below.
IMPORTANT: if you call out an engineer to a fault listed below, or to repair a fault caused by incorrect
use or installation, a charge will be made even if the appliance is under guarantee.
Symptom
Possible causes
●
●
The door has not been closed.
The plug is not properly inserted in the power
socket.
The tumble dryer does not start
●
●
●
There is no current at the socket
The main fuse or the fuse in the plug has blown.
A drying time has not been selected.
●
●
●
●
Drying takes too long or laundry is not dry
enough.
The laundry has not been spun properly.
The filter is clogged up.
The room temperature is too high.
The selected time or sector was not suitable for
the laundry
●
●
●
There is too much laundry inside the appliance.
The dryer is not correctly installed.
The Low Temperature or Cool Tumble Button
has been depressed.
Service & Spare Parts
In the event of your appliance requiring service, or if
you wish to purchase spare parts, please contact your
local Service Force Centre by telephoning:
0870 5 929929
Your telephone call will be automatically routed to the
Service Force Centre covering your post code area.
Mod. ...
Prod. No. ........
Ser. No. ............
P0307
For the address of your local Service Force Centre
and further information about Service Force, please
Before calling out an engineer, please ensure you have read
the details under the heading “Something Not Working”.
Customer Care Department
For general enquiries concerning your Zanussi
Electrolux appliance or for further information on
Zanussi Electrolux products, please contact our
Customer Care Department by letter or telephone at
the address below or visit our website at
When you contact the Service Force Centre you will
need to give the following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault
4. The model and serial number of the appliance
(found on the rating plate - see picture)
5. The purchase date.
Customer Care Department
Major Appliances
Addington Way
Luton
Bedfordshire
Please note that a valid purchase receipt or
guarantee documentation is required for in-
guarantee service calls.
LU4 9QQ
Tel 08705 727727*
To buy accessories, consumables and spare parts at
electrolux.co.uk
* calls to this number may be recorded for training
purposes.
11
Zanussi Guarantee Conditions
Standard guarantee conditions
Exclusions
We, Zanussi Electrolux, undertake that if, within 12
months of the date of the purchase, this ZANUSSI
ELECTROLUX appliance or any part thereof is
proved to be defective by reason only of faulty
workmanship or materials, we will, at our option
repair or replace the same FREE OF ANY CHARGE
for labour, materials or carriage on condition that:
This guarantee does not cover:
●
Damage or calls resulting from transportation,
improper use or neglect, the replacement of any
light bulbs or removable parts of glass or plastic.
●
Costs incurred for calls to put right an appliance
which is improperly installed or calls to
appliances outside the United Kingdom.
●
The appliance has been correctly installed and
●
Appliances found to be in use within a
used only on the electricity supply stated on the
rating plate.
commercial environment, plus those which are
subject to rental agreements.
●
The appliance has been used for normal domestic
●
Products of Zanussi Electrolux manufacture
purposes only, and in accordance with the
manufacturer’s instructions.
which are NOT marketed by Zanussi Electrolux.
●
The appliance has not been serviced, maintained,
repaired, taken apart or tampered with, by any
person not authorised by us.
European guarantee
If you should move to another country within Europe
then your guarantee moves with you to your new
home subject to the following qualifications:
●
All service work under this guarantee must be
undertaken by a Service Force Centre.
●
Any appliance or defective part replaced shall
become the Company’s property.
The guarantee starts from the date you first
●
purchased your product.
●
This guarantee is in addition to your statutory and
other legal rights.
The guarantee is for the same period and to the
●
same extent for labour and parts as exists in the
new country of use for this brand or range of
products.
Home visits are made between 8.30am and 5.30pm
Monday to Friday. Visits may be available outside
these hours in which case a premium will be
charged.
The guarantee relates to you and cannot be
●
transferred to another user.
Your new home is within the European
●
Community (EC) or European Free Trade Area.
The product is installed and used in accordance
●
with our instructions and is only used
domestically, i.e. a normal household.
The product is installed taking into account
●
regulations in your new country.
Before you move please contact your nearest
Customer Care Centre, listed below, to give them
details of your new home. They will then ensure that
the local Service Organisation is aware of your move
and able to look after you and your appliances.
France
Germany
Italy
Senlis
+33 (0) 344 62 29 29
+49 (0) 800 234 7378
+39 0434 39 4700
Nurnberg
Pordenone
Stockholm
Luton
Sweden
UK
+46 (0) 8 672 53 90
+44 (0)
8705 727727
12
Installation Instructions
It is dangerous to alter the specifications or
attempt to modify this product in any way.
Care must be taken to ensure that the appliance
does not stand on the electrical supply cable.
Any electrical work required to install this
appliance should be carried out by a qualified
electrician or competent person.
Technical Specifications
DIMENSIONS
Height
Width
Depth
85 cm (33.5”)
60 cm (23.6”)
57 cm (22.4”)
POWER SUPPLY VOLTAGE
TOTAL POWER ABSORBED
230-240 V/50 Hz
2250 W (10A)
MAXIMUM RECOMMENDED LOAD
Cotton, linen
Synthetics
6. kg (11 lbs)
2.5 kg (5.5 lbs)
DRUM VOLUME
CONSUMPTIONS
108 l
4.00 kWh (6 kg store dry)
3.20 kWh (6 kg iron dry)
This appliance complies with the following E.E.C. Directives:
- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
13
Positioning
It is recommended that, for your convenience, the
machine is positioned close to your washing
machine.
Fitting the vent hose
To simplify the installation, there is a choice of vent
outlets: one at the back, the others in the left and
right-hand side.
Whilst drying, the tumble dryer will expel a certain
amount of warm, very moist air, and this should be
removed from the room as quickly as possible to
prevent condensation. In an extremely well ventilated
room or close to an open window, this may occur
naturally.
Connect the hose to whichever is the more
convenient by pulling the ring nut (A) from the vent
outlet at the back, screwing it on to the hose and
pushing it firmly back into place.
The unused vents should now be sealed with the
special snap covers provided.
However, in general, it is better to carry the dryer's
exhaust outside via a 100 mm diameter flexible hose
(supplied with the machine); ending either
temporarily at an open window, or permanently at a
fixed ventilation grille, fitted to an exterior wall or
window.
A
The tumble dryer must be installed in a clean place,
where dirt does not build up.
Make sure there are no obstructing items or material
near the air-intake louvres provided at the back (e.g.
paper, rags etc.).
To keep vibration and noise to a minimum when the
dryer is in use, it should be placed on a firm, level
surface.
Once in its permanent operating position, check that
the dryer is absolutely level with the aid of a spirit
level. If it is not, raise or lower the two adjustable
feet at the front of the machine until it is.
A
P1028
P1027
Advice: If the hose is long and the room temperature
low, the moisture might condense to water inside the
hose. This is an unavoidable natural phenomenon.
To prevent this water from lying in the hose or
flowing back into the tumble dryer, it is advisable to
drill a small hole (dia. 3 mm) in the lowest point of
the hose and to place a small container below it.(See
picture, point B).
B
P1056
P0046
Once connected to the dryer, run the vent hose to the
desired outlet point, ensuring that the run’s overall
length is less than 2.5 m, and that it contains no more
than two bends. As to the outlet itself, if you have
decided on a fixed wall/window grille, a good local
builder’s merchant should be able to supply you with
the necessary fittings and installation advice.
The feet must never be removed.
Do not restrict the floor clearance through deep-
pile carpets, strips of wood or similar. This might
cause heat build-up which would interfere with
the operation of the appliance.
Important
When operating the tumble dryer, the room
temperature must not exceed 35°C, as it may affect
the performance of the appliance.
14
It is important not to connect the vent
hose to, for example, a cooker hood,
or a chimney or flue pipe designed to
carry the exhaust from a fuel burning
appliance.
Door reversal
To make it easier to load or unload the laundry the
door can be reversed.
This operation must be carried out by your local
Service Force repair agent (tel 08705 929929).
This will be a chargeable option.
Operate as follows:
- Remove the door by unscrewing the two screws (1)
fastening the hinge to the cabinet (Fig. A).
- Remove the safety catch (2) and the plug (3) by
bending the two fastening tags (Fig. A).
P0055
Note that to avoid condensation problems, it is
essential that the dryer be fitted with the flexible hose
to carry its “exhaust” at least beyond the kitchen
units; preferably outside the kitchen.
2
In order to prevent the appliance from overheating, it
is important that the steam exhaust is unobstructed.
Therefore, in case of a permanent hose fitted to an
exterior wall or ceiling, it must have an exhaust
capacity of at least 150 m3/h.
4
1
3
A
P0283
- Refit the safety catch (2) and plug (3) on the door
by reversing their positions (Fig. B).
If the dryer is fitted next to kitchen units, make
sure that the vent hose is not squashed. If the hose
is partially squashed, drying efficiency will be
reduced, resulting in longer drying times and
higher energy consumption.
If the hose is completely squashed, the safety cut-
outs with which the machine is fitted may operate.
2
4
1
3
B
P0748
Stacking kit
It should be possible to stack your new dryer on top
of your washing machine.
- Remove the plastic plate (4) by unscrewing the two
fastening screws (Fig. A).
- Refit the plastic plate (4) on the opposite side
(Fig. B).
Please contact your local Service Force Centre for
further advice.
- Refit the door by screwing in the two screws (1)
which fasten the door to the cabinet (Fig. B).
P0280
15
The wire coloured brown must be connected to the
terminal marked «L» or coloured red.
Upon completion there must be no cut, or stray
strands of wire present and the cord clamp must be
secure over the outer sheath.
Electrical connection
Any electrical work required to install this appliance
should be carried out by a qualified electrician or
competent person.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
WARNING:
A cut off plug inserted into a 10 amp socket
is a serious safety (shock) hazard.
Ensure that the cut off plug is disposed of
safely.
The manufacturer declines any liability
should this safety measure not be observed.
Before switching on, make sure the electricity supply
voltage is the same as that indicated on the
appliance’s rating plate. (See picture).
The power supply cable must be easily accessible
after installing the machine.
Permanent connection
In the case of permanent connection it is necessary
that you install a double pole switch between the
appliance and the electricity supply (mains), with a
minimum gap of 3mm between the switch contacts
and of a type suitable for the required load in
compliance with the current electrical regulations.
Mod. ...
Prod. No. ........
Ser. No. ............
P0307
The appliance is supplied with a 10amp plug fitted.
In the event of having to change the fuse in the plug
supplied, a 10amp ASTA approved (BS 1363/A) fuse
must be used.
The switch must not break the yellow and green earth
cable at any point.
Should the plug need to be replaced for any reason,
proceed as described below.
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow
Blue
- Earth
- Neutral
- Live
Brown
GREEN & YELLOW
E
L
N
BROWN
BLUE
CORD CLAMP
P1041
The wire coloured green and yellow must be
connected to the terminal marked with the letter «E»
or by the earth symbol
yellow.
or coloured green and
The wire coloured blue must be connected to the
terminal «N» or coloured black.
16
From the Electrolux Group. The world’s No. 1 choice.
The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor
use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines,
vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in
more than 150 countries around the world.
© Electrolux plc 2005
|