™
XCam2 InstantON Low Light B/W Camera
● Extremely small size.
● Built-in 2.4 GHz Video Sender.
Model XX20A
● Can be turned on and off remotely (remote controlled power supply included).
● Use it outdoors to monitor your front door, back yard, etc.
● Gives clear pictures even in extremely low light conditions (Use it to monitor a child’s bedroom).
The XX20A includes the XC22A camera and XM16A remote controlled power supply. The XC22A is a very small and
compact black & white video camera with built-in 2.4 GHz transmitter. You can attach it to a wall anywhere you want to
monitor. The XC22A transmits video and sound to the VR31A, or video only to the VR36A receiver which is connected to
your TV located anywhere in your home (up to 100 ft. away). The XM16A power supply lets you turn the camera on and off
remotely, from X10 remote controls (sold separately). The XC22A camera works great even in extremely low light conditions.
1. Refer to the setup and operating instructions that came
with the 2.4 GHz Video Receiver, Model VR31A or
VR36A (sold separately) to set up the Receiver.
2. Mount the camera in a suitable location with the antenna
on top so the camera is the right way up. If you install it
outdoors, run the small cable adapter through a hole in
the wall so you can plug the power supply into an AC
outlet indoors.
Point the raised dimple
on the antenna towards
the Receiver’s location.
Point backwards from
direction shown here if
you install the camera
outdoors.
7
Attach
2
to a wall.
XC22A
3. Plug the power supply’s jack into the adapter cable on
the camera.
4. Set the Housecode and Unit Code. (See instructions
included with X10 remote controls).
6
Set channel switch
(under rubber plug)
to match setting on
VR31A or VR36A
Receiver. (A is at
bottom, D is at top).
It is factory set to A.
5. Plug the power supply into any 120V AC outlet.
6. Set the channel switch on the camera to the same setting
as the one on the VR31A or VR36A Video Receiver.
7. Adjust the antenna on the camera if necessary to aim it
in the direction of the VR31A/VR36A Receiver that
you have connected to your TV.
Remove clear cap and turn
lens counterclockwise to
focus (replace cap for
Outdoors
outdoor use).
Indoors
LIMITED1-YEARWARRANTY
X10.com, a division of X10 Wireless Technology, Inc. (X10)
warrants X10 products to be free from defective material and
workmanshipforaperiodofone(1)yearfromtheoriginaldateof
purchase at retail. X10 agrees to repair or replace, at it’s sole
discretion, a defective X10 product if returned to X10 within the
warranty period and with proof of purchase.
Cable adapter.
3
Plug power
supplyin
here.
If service is required under this warranty:
5
Call1-800-675-3044orvisitwww.x10.com,ore-mail
[email protected] to obtain a Return Merchandise Authorization
(RMA) number. Please do not return any products without an
RMAnumber.
Plug into
any AC
outlet
Set the code used to
4
turn on and off from
X10 remote controls.
Pleasevisitwww.x10.com/warranty
tocompleteyouron-linewarrantyregistration.Thankyou.
XM16A
F.C.C. CAUTION - THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:(1)THISDEVICEMAYNOTCAUSEHARMFULINTERFERENCE,AND(2)THISDEVICEMUSTACCEPTANYINTERFERENCE
RECEIVED,INCLUDINGINTERFERENCETHATMAYCAUSEUNDESIREDOPERATION.NOTE:NOCHANGESORMODIFICATIONSMAYBE
MADETOTHEUNITS. ANYCHANGESMADETOTHEUNITSWILLVOIDTHEUSER'SAUTHORITYTOOPERATETHEEQUIPMENT.
XX20A-1/04
X10.com, a Div. of X10 Wireless Technology, Inc.
|