Whirlpool Water Dispenser HD1000JS User Manual

®
Hot Water Dispenser  
PRODUCT MODEL NUMBER  
HD1000JS  
Electrical: A 120-volt, 60-Hz, AC-only 15- or  
20- ampere fused, grounded electrical supply is  
required. It is recommended that a separate circuit  
serving only your hot water dispenser be provided.  
Use an outlet that cannot be turned on/off by a  
switch.  
Water supply requirements: If local codes  
permit, the hot water dispenser feed line should be  
connected to the cold water supply line using a  
saddle tapping valve.  
Important: If local codes Do Not permit the use of  
saddle valves, special feed valves can be obtained  
from your local plumbing supply distributor.  
OVERALL DIMENSIONS  
If spout is not to be  
Spout installed in spray hose  
opening in sink.  
installed in sink spray hose  
opening, cut 1-1/16" min. —  
1-3/8" max. dia. sink or  
countertop cutout.  
Important: Observe all governing  
codes and ordinances.  
1-1/8" max. countertop or  
sink thickness  
Cold  
water  
line  
Tank  
must be  
mounted  
vertically.  
11-1/8"  
42" max. — electrical  
outlet to hot water  
dispenser tank.  
6-3/4"  
7-13/16"  
Saddle  
valve  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. 3193347  
10-16-03  
 

Weslo Treadmill WLTL29200 User Manual
Westinghouse Outdoor Ceiling Fan UL ES Verandahbreeze Who9 User Manual
Whistler Radar Detector 1670LD User Manual
Windsor Sander P1700120 User Manual
Winegard TV Antenna RTS 80B User Manual
Woodstock Telephone D2258 300 04 2000 User Manual
Yamaha CD Player CRW2216E User Manual
Zanussi Dishwasher DA 6152 User Manual
Zebra Technologies Printer Portable Encoding Printer User Manual
Zenoah Trimmer CHTZ6010 User Manual